|
Axial Machines
 |
JV, AE, AVB Panasert Machines |
| |
5mm to 10mm lead pitch |
| |
Hold side : 1.0mm -1.5mm for standard parts |
| |
26mm to 52mm feeder type |
| |
Of line machine programming |
| |
|
|
|
Capacity |
| |
9million component insert per month |
Radial Machines
 |
RH Panasert Machine |
| |
2.5mm to 5mm lead pitch |
| |
Hold side : 1.0mm -1.5mm for standard parts |
| |
2.5mm to 5mm feeder type |
| |
Of line machine programming |
| |
|
|
|
Capacity |
| |
3million component insert per month |
| |
|
| |
| |
Surface Mount Machines
|
|
4 JUKI SMT lines |
| |
Line 1 = KE750 and KE760 |
| |
Line 2 = KE750 and KE760 |
| |
Line 3 = KE2010 and KE2020 |
| |
Line 4 = KE740 and KE2020 (Support
for small volume) |
| |
Medium-speed chip and IC placement |
| |
Chips size : 0201, 0402, 0603, 0805, 1206,
1210, 1812 |
| |
IC size : SOP, PLCCs, QFPs, TSOP |
| |
Lead pitch: Max. 0.65mm, Min 0.3mm |
| |
Board size : Min. 50mm x 30mm, Max. 410
x 360mm |
| |
|
|
|
Capacity |
| |
25 million components placement per month |
IR Reflow Soldering
|
|
OmniFlo-7 Electrovert, Vitronic XPM820, Furukawa-9 |
|
Solder and PB-Free support (RoHS) |
|
Hot air convection reflow, |
|
Pin chain conveyor width : Max. 500mm, Min
50mm |
|
Blower Rating : 270M3 per hour (160 cfm) |
|
Total Flow : 4,350 M3 per hour (2560 cfm)with
16blowers |
|
|
Manual insertion & Tuch up or Hand Soldering line
|
|
Manual Insertion line |
| |
2 Lines, 12 Operators |
| |
KOKI Wave soldering machine |
|
|
Hand Soldering line |
| |
2 Lines, 12 Operators |
| |
Lead free/RoHS |
| |
HAKO Soldering irons |
| |
|
Incircuit Tester
 |
TR-518FO ICT (TRI) 2 Machines |
| |
Short & Open circuit test |
| |
Resistor, Capacitor, Inductance, IC, diode
test etd. |
| |
Test Pins : Standard 256 pins, Max : 3328 pin |
| |
Test time : |
| |
Short/Open Check : 1.5 Sec. per 1000 pins |
| |
Component Check : 2ms to 40ms per component |
| |
Test Steps : Standard 6400 steps |
 |
Functional Tester and software programming |
| |
Base on customer requirement and tester
support | |
|
